1. Home
  2. Why Gutter Proof
Why Gutter Proof

Most companies install a gutter guard. We fix the gutter first.

A guard fitted to a failing gutter fails with it. Cleaning, resealing, realigning and reinforcing are not extras on the quote; they are four of the five things we came to do.

Get your free inspection
The real cost

What a failing gutter does to the house.

Water that cannot leave the roof has to go somewhere else, and it works its way down the house from the eave to the footing. Every one of these starts at a gutter.

01 02 03 04 05 06 07 Get your free inspection
  1. Ice dams at the eave
    01

    Ice dams at the eave

    Water that cannot drain freezes at the edge, builds into a ridge, and forces the next melt back up under the shingles.

  2. A fascia board rotted right through behind a gutter that has pulled away from it
    02

    Rotten fascia board

    Water spilling behind the gutter sits against the fascia until the timber goes soft and the hangers have nothing left to hold.

  3. The gutter drops out of line
    03

    The gutter drops out of line

    A blocked gutter carries the weight of everything in it. The hangers pull out, the run sags, and the water stops moving.

  4. Mould down the siding
    04

    Mould down the siding

    Overflow runs down the wall instead of the downspout. Dark streaks first, then algae, then rot in whatever is behind it.

  5. Foundation erosion
    05

    Foundation erosion

    Roof water landing in one place digs a trench along the wall and washes out the ground the footing is sitting on.

  6. A wet basement
    06

    A wet basement

    Saturated ground beside the foundation is what pushes water through it. Most wet basements start at the roofline.

  7. Heaving driveway
    07

    Heaving driveway

    Water pooling at the edge of the slab freezes, expands, and lifts the concrete out of level.

Who we are

We started this because we were tired of it too.

Almost every house we walk up to has the same problem. Blocked gutters, water down the wall, a guard on top that somebody paid a great deal of money for and that stopped working years ago.

Tired of

Prices that have nothing to do with the work. Thousands of dollars for a strip of plastic and an afternoon, sold on a kitchen table before anyone has been up to look at the roof.

Tired of

Warranties written so that they never have to be honoured. Parts only, not labour, void the moment you sell, and impossible to claim on by the time the guard has failed.

Tired of

Protection that does not protect. A guard fitted over a gutter nobody cleaned, resealed or realigned first, which fails with the gutter and takes the homeowner's trust down with it.

So we do this

Fix the gutter first. Then protect it.

Clean, reseal, realign, reinforce, then stainless steel micro-mesh on top. Photograph every bit of it. One honest number on the page, and a warranty that outlives the sale.

Priced for local Canadian families, not for the pitch.

The difference

Same job. Two very different days.

Four things happen on every gutter guard job. Here is what each one is worth crossing out.

  1. The gutter underneath

    The guard goes straight onto whatever is already there.

    Cleaned, resealed, realigned and reinforced first.

  2. The material

    Plastic lattice or fibreglass screen, brittle in two winters.

    Stainless steel micro-mesh. Birds cannot tear it.

  3. Sagging sections

    More weight on hangers that were already giving up.

    Heavy duty brackets go in before anything sits on top.

  4. Before you get a price

    A number over the phone, and a reason to decide today.

    A drone survey of your actual roofline, then a number.

See all five steps See the material

The short answer

Nine things that are different about the day.

None of these are add-ons and none of them are upsells. They are what the job is.

A drone survey before a price

The full roofline is photographed close up, including the elevations you cannot see from the ground. About twenty minutes, nobody on your roof, and the images are yours whether or not you go ahead.

The gutter is repaired first

Cleaned out and flushed, then resealed, realigned and reinforced. Four steps, on every job, before any mesh is fitted.

Drainage is set, not assumed

The run is brought to a quarter inch of fall per ten feet so water leaves the system instead of standing in a low spot and freezing there.

Every joint is sealed

Corners, end caps, seams and downspout collars, with architectural grade sealant. This is where an old gutter actually leaks.

Reinforced before it is loaded

New heavy duty hangers wherever the old ones pulled loose, and hidden brackets where a run needs support. Before any weight goes on top.

Stainless steel, not plastic

Micro-mesh on an extruded aluminum frame. It will not rust, will not go brittle in the cold, and birds cannot tear it.

One number, with photographs

The quote is built off the survey and comes back as a single price. It does not move if you push back, and it does not move on the invoice.

A warranty that transfers

Mesh and workmanship, for the functional life of the installed product at your address, and it goes to the next owner with the keys.

Most homes take one day

All five steps in a single visit on the majority of houses. The debris leaves with us and the finished run is photographed before we go.

If a guard already failed on your house Read the warranty in full Where we work

Get started

Get your FREE gutter inspection today!

Gutter Proof uses professional drones to inspect your entire roofline up close, capturing every gutter run, corner, seam, and downspout. No ladders. No guessing. No obligation.

gutterproofcanada@gmail.com See our work on Instagram

Preferred contact method

Your details are used to arrange the inspection and nothing else. What we do with them.