1. Home
  2. Service areas
  3. Innisfil
Innisfil, Simcoe County

Gutter guards in Innisfil

Simcoe County, along the west shore of Lake Simcoe. Four steps on the gutter itself before any mesh is fitted.

Get your free inspection
Gutter protection in Innisfil

Fix the gutter first. Then protect it.

Innisfil runs up the west shore of Lake Simcoe between Bradford and Barrie, and takes in Alcona, Stroud, Lefroy and Cookstown. It is one of the two Simcoe County municipalities on our map and the last one before Barrie.

Lakeshore houses here sit under mature trees and take weather off open water, which is a harder combination than it sounds. Wind-driven rain arrives at a gutter from the side rather than off the roof, and a run that has lost its pitch or opened at a seam shows it quickly in those conditions.

How the system is built Replacing failed guards

Stainless steel micro-mesh fitted along a finished gutter run
Step 05, the finished run
The work

Five steps on every Innisfil job.

Four of the five happen before any mesh goes on. That order is the whole difference between gutter protection and a guard laid over a gutter that was already failing.

  1. Step 01

    Clean

    Everything comes out by hand, then the run is flushed until the downspout comes out clear.

  2. Step 02

    Reseal

    Every corner, end cap, seam and downspout collar is sealed. This is where an old gutter actually leaks.

  3. Step 03

    Realign

    Sagging sections come back to line and the whole run is set to a quarter inch of fall per ten feet.

  4. Step 04

    Reinforce

    New heavy duty hangers go in wherever the old ones pulled loose, before any weight goes on top.

  5. Step 05

    Protect

    Stainless steel micro-mesh goes on last, cut to your gutter profile and fastened down.

Read the five-step process in full

The material

Stainless steel micro-mesh on an aluminum frame

A rigid aluminum frame for structural strength and long-term corrosion resistance, and a precision stainless steel micro-mesh that filters fine debris without giving up water flow. Rain goes through. Leaves, needles, maple keys and shingle grit stay on top and blow off dry.

  • Aluminum frameRigid, extruded, holds its line
  • Corrosion resistantWill not rust or degrade
  • Micro-mesh filtrationFine debris stays on top
  • Full water flowNothing given up to filter it

See the gutter guard system

A Gutter Proof panel: extruded aluminum frame rails either side of a stainless steel micro-mesh field
Worth knowing locally

Why the preparation matters here.

A guard fitted to a failing gutter fails with it. That is true on every street in the GTA, and it is the reason the mesh is the fifth thing we do rather than the first.

Innisfil

Water coming off the lake does not care what is fitted on top of a gutter if the gutter underneath is not sealed and sitting at the right fall. That is why resealing and realignment are steps two and three rather than extras on a quote.

What happens at the free inspection What the lifetime warranty covers

Get started

Get your free gutter inspection in Innisfil

Gutter Proof uses professional drones to inspect your entire roofline up close, capturing every gutter run, corner, seam, and downspout. No ladders. No guessing. No obligation. Innisfil is inside our service area.

gutterproofcanada@gmail.com See our work on Instagram

Preferred contact method

Your details are used to arrange the inspection and nothing else. What we do with them.