1. Home
  2. Service areas
  3. Etobicoke
Etobicoke, City of Toronto

Gutter guards in Etobicoke

The western district of Toronto, from the lake up to Steeles. Same five steps, same warranty, same free drone inspection.

Get your free inspection
Gutter protection in Etobicoke

Fix the gutter first. Then protect it.

Etobicoke is the western district of the City of Toronto, running from Lake Ontario north to Steeles Avenue, and from the Humber River west to Etobicoke Creek, where Mississauga begins. It was a separate city until the 1998 amalgamation.

The work does not change with the postcode. We clean the run out by hand, flush it to the downspout, reseal every joint with architectural grade sealant, correct the pitch, reinforce with heavy duty hangers, and then fit stainless steel micro-mesh cut to your gutter profile.

How the system is built Replacing failed guards

Stainless steel micro-mesh fitted along a finished gutter run
Step 05, the finished run
The work

Five steps on every Etobicoke job.

Four of the five happen before any mesh goes on. That order is the whole difference between gutter protection and a guard laid over a gutter that was already failing.

  1. Step 01

    Clean

    Everything comes out by hand, then the run is flushed until the downspout comes out clear.

  2. Step 02

    Reseal

    Every corner, end cap, seam and downspout collar is sealed. This is where an old gutter actually leaks.

  3. Step 03

    Realign

    Sagging sections come back to line and the whole run is set to a quarter inch of fall per ten feet.

  4. Step 04

    Reinforce

    New heavy duty hangers go in wherever the old ones pulled loose, before any weight goes on top.

  5. Step 05

    Protect

    Stainless steel micro-mesh goes on last, cut to your gutter profile and fastened down.

Read the five-step process in full

The material

Stainless steel micro-mesh on an aluminum frame

A rigid aluminum frame for structural strength and long-term corrosion resistance, and a precision stainless steel micro-mesh that filters fine debris without giving up water flow. Rain goes through. Leaves, needles, maple keys and shingle grit stay on top and blow off dry.

  • Aluminum frameRigid, extruded, holds its line
  • Corrosion resistantWill not rust or degrade
  • Micro-mesh filtrationFine debris stays on top
  • Full water flowNothing given up to filter it

See the gutter guard system

A Gutter Proof panel: extruded aluminum frame rails either side of a stainless steel micro-mesh field
Worth knowing locally

Why the preparation matters here.

A guard fitted to a failing gutter fails with it. That is true on every street in the GTA, and it is the reason the mesh is the fifth thing we do rather than the first.

Etobicoke

Whatever is over your gutters now, the inspection is free and the images are yours whether you go ahead or not. Nobody goes on your roof to get them.

What happens at the free inspection What the lifetime warranty covers

Get started

Get your free gutter inspection in Etobicoke

Gutter Proof uses professional drones to inspect your entire roofline up close, capturing every gutter run, corner, seam, and downspout. No ladders. No guessing. No obligation. Etobicoke is inside our service area.

gutterproofcanada@gmail.com See our work on Instagram

Preferred contact method

Your details are used to arrange the inspection and nothing else. What we do with them.